It can be tough to know what to dress babies in with the cold weather, especially as thick padded snow suits are not recommended for use in a car seat. And blankets shouldn’t go under the straps and when they are laid on top they can be kicked off. So how do you keep baby warm?
It’s easy! (in every sense!)
You will need:
- A piece of fleece at least 30 x 40 inches (I cut up one of the really cheap IKEA fleece blankets which only costs £1.50! And now I have more fleece left over for another project)
- Tape measure
Cut out a rectangle which measures at least 40 inches wide, by 30 inches high. If you want to get a little bit fancy you can round the corners like I did, but it makes absolutely no difference to the final thing!
Then fold the blanket in half vertically to make a rectangle of 20 x 30 inches. Half way up the blanket, on the fold, cut a straight line in from the edge, through both layers, 1.5 inches long (so when the blanket is unfolded the hole is 3 inches wide). This is the hole for the clip part of the seatbelt to go through (does that bit have a proper name? Am I just having a major baby brain moment?!).
Feed the clippy bit through the hole on your baby’s car seat. You’ll probably find there’s a little fold over needed at the top edge of the blanket under the shoulder straps, but it leaves room to grow!
Then find yourself an adorable baby and pop them in it!
As you can see you strap them in before you cover them with the blanket. Then fold the blanket like an old fashioned swaddle, folding over the excess at the feet, and you’ll have one toasty little baby all ready to go!
He is never that happy to go in his car seat when it’s actually going in the car… How can he tell the difference?!?